1.888.610.7664
● Never attempt to use the instrument if its surface or your hand is wet.
● B e careful not to short-circuit a power line with the metal part of the test
lead during a measurement. It may cause personal injury.
● Never open the battery compartment cover during a measurement.
● T he instrument should be used only in its intended applications or
conditions; otherwise, safety functions equipped with the instrument don t
work, and instrument damage or serious personal injury may be caused.
● V erify proper operation on a known source before use or take actions as a
result of the indication of the instrument.
# WARNING
● D o not use the instrument or test leads if any abnormal conditions, such
as broken cover or exposed metal parts are noted.
● F irst, firmly connect the test leads to the instrument, and then press the
test button.
● Never install substitute parts or make any modifications to the instrument.
S end the instrument to your local KYORITSU distributor for repair or re-
calibration.
● Do not try to replace batteries if the surface of the instrument is wet.
● Connect each test lead firmly into the corresponding terminals.
● S top using the test lead if the outer jacket is damaged and the inner
metal or color jacket is exposed.
● E nsure that the function switch is set to OFF position before opening the
battery compartment cover for battery replacement.
● N ever turn the function switch while the test leads are connected to the
equipment under test.
# CAUTION
● A lways make sure to set the function switch to the appropriate position
before making a measurement.
● P ower off the instrument after use. Remove batteries if the instrument is
to be stored and won t be used for a long period.
● D o not expose the instrument to direct sunlight, high temperature,
humidity or dew.
● U se a slightly damp cloth with neutral detergent or water for cleaning.
Do not use abrasives or solvents.
● T his instrument isn t water-proof. Do not let the instrument get wet.
Otherwise, it may cause malfunction.
● I f the instrument is wet, make sure to let it dry before putting it into
storage.
● Keep your hand and fingers behind the barrier during a measurement.
̶ 2 ̶
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com