1.888.610.7664
(3) P ower off the instrument when setting completes. (The latest settings are
saved and won t be cleared even after powering off the instrument.)
[KEW 3552/ 3552BT]
(1) Get the instrument into setting mode.
1. S et the function switch to any position other than low-resistance
measurement, and then hold down the SETUP button ( 2 sec.) while in
the stand-by mode.
2. U se the cursor key and toggle the screens for backlight and buzzer
setting; the following figures shows each setting screen.
Backlight setting screen:
The LCD shows" bL" .
Blink
Buzzer setting screen:
The LCD shows"
"symbol.
Blink
(2) P ress the ENTER button to toggle the settings. The currently selected
setting can be checked by on or oFF indication shown in the LCD.
Fig. 10-6
(3) T he instrument exits from the setting mode by pressing the ESC button.
T he changes you made are saved and won t be cleared even after
powering off the instrument.
̶ 34 ̶
www.calcert.com
15
10
20
5
25
0
30
Fig. 10-4
Fig. 10-5
Fig. 10-7
sales@calcert.com