KYORITSU KEW3552 Instruction Manual page 31

1.888.610.7664
(2) P ress the cursor key to toggle the reference values. Press the ENTER
button to set and save the displayed value as a reference value. The
following values are selectable.
OFF, 0.100 MΩ, 0.125 MΩ, 0.200 MΩ, 0.250 MΩ, 0.400
Selectable
MΩ, 0.500 MΩ, 1.000 MΩ, 10.00 MΩ, 100.0 MΩ, Any
values
(Selectable range: 0.000 MΩ ‒ 4199 MΩ)
Select Any to set your desired value as a reference value:
1. Select the place of decimal
point with cursor key, and
press ENTER to confirm.
2. Determine the value for ones
place, and press ENTER to
confirm.
3. Determine the value for tenths
place, and press ENTER to
confirm.
4. Determine the value for
hundredths place, and press
ENTER to confirm.
5. Determine the value for
thousandths place, and press
ENTER to confirm.
To go one step back, press the ESC button.
When symbol and range indication start blinking, it means the
settings are completed.
(3) P ress the ESC button when settings complete. The selected reference
values are saved, and the instrument returns to stand-by mode.
( The saved reference values won t be cleared even after powering off the
instrument.)
̶ 28 ̶
www.calcert.com
15
10 20
5 25
0 30
Fig. 8-17
Fig. 8-18
Fig. 8-19
Fig. 8-20
Fig. 8-21
sales@calcert.com