Table of Contents
Advertisement
1.888.610.7664
[KEW 3551]
(1) Get the instrument into setting mode.
1. E nsure that the instrument is powered off. Hold down the 0ΩADJ
button.
2. K eep the 0ΩADJ button held down, and set the function switch to V/
Ω position. The instrument wakes up and the LCD segments start
blinking to indicate now the instrument is in setting mode.
1. Hold down the 0 ΩADJ button; do not release it.
(2) P ress the SELECT button to toggle the settings. The settings are toggled
in the following sequence: 1 -> 2 -> 3 -> 4 ->1.
Settings
1
Buzzer
ON
LCD backlight/
ON
LED light
The buzzer symbol and LCD backlight indicate the currently selected mode.
● Buzzer:
Blinking buzzer symbol means ON , no symbol means OFF .
● LCD backlight/ LED light:
Blinking backlight means ON ; if not, it means OFF . The on or
oFF indication is also displayed at the lower left of the LCD accordingly.
Blinks when LCD
backlight/ LED light
are ON.
When LCD backlight/LED lights are set
to ON,"on"appears, and"oFF"appears
when these lights are set to OFF.
̶ 33 ̶
www.calcert.com
15
10
20
5
25
0
30
2. Set the function switch
to V/Ω position.
Fig. 10-2
Mode
2
3
4
OFF
ON
OFF
ON
OFF
OFF
Blinks when buzzer
is ON.
Fig. 10-3
sales@calcert.com
Advertisement
Table of Contents
