Fig. 145 Insertion Of Variable "Var 1" Fitting To The Oversampling (-Factor); Fig. 146 Set Up The Link Of The Plc Array Variable (Left: For The Last Preceding Paragraph Step 2A, Right: For The Last Preceding Paragraph Step 2B); Fig. 147 Select The El3773 Pdo "L1 Voltage Samples" To Create A Link To The Plc Array Variable „Aui_Samples - Beckhoff EL3783 Documentation

Commissioning
Fig. 145: Insertion of variable "Var 1" fitting to the oversampling (-factor)
Step 3: Linking an array variable with an oversampling PDO
By right click on "MAIN.aUI_Samples" (according to the last preceding paragraph Step 2a) or rather
"Var 1" (according to the last preceding paragraph Step 2b) within the Solution Explorer a window opens to
select the process data:
Fig. 146: Set up the link of the PLC array variable (left: for the last preceding paragraph Step 2a, right: for the
last preceding paragraph Step 2b)
Fig. 147: Select the EL3773 PDO "L1 Voltage Samples" to create a link to the PLC array variable
„aUI_Samples"
116 Version: 1.1 EL3783