Fig. 141 Adding A Scope Project Into An Already Existing Project - Beckhoff EL3783 Documentation

Terminal Revision
EL4732 all
EL4712 all
EL3783 EL3783-0000-0017
EL3773 EL3773-0000-0019
EL3751 all
EL3742 all
EL3702 all
EL3632 all
EL2262 all
EL1262-0050 all
EL1262 all
EP3632-0001 all
EPP3632-0001 all
Recording a PLC Variable with the TwinCAT 3 – ScopeView
By a precondition of an already created TwinCAT 3 – project and a connected PLC with an oversampling
able terminal/box within the configuration it will be illustrated how an oversampling variable can be
represented by the Scope (as a standard part of the TwinCAT 3 environment). This will be explained by
means of several steps based on an example project "SCOPE_with_Oversampling" as a standard PLC
project.
Step 1: Adding a project „Scope YT"
The example project "SCOPE_with_Oversampling" has to be added a TwinCAT Measurement – project
"Scope YT project" (C) by right click (A) and selection (B) "Add" → "New Project..". Then "Scope for OS" will
be entered as name. The new project just appears within the solution explorer (D).
Fig. 141: Adding a Scope project into an already existing project
EL3783 Version: 1.1
Commissioning
113