Programming Functions - Alarm Lock Wireless Networx PDLN4100 Programming Instructions Manual

"residency" and "privacy" locks supports version 2 gateways and expanders

Hide thumbs

Table Of Contents

Table of Contents

USERS

1. New Master Code



Master Code must be 6 digits-only.



Master Code is Keypad Code Access only.



Factory Default = 123456



See "Lock Design Overview" on page 6 for more information about Master Codes.

2. Adding and Deleting User Codes and/or Proximity

Cards (for User Numbers 2-5000)

(Entering a "User Code" / "PIN No. Code" into the lock programming)

 User Number must be between 2 and 5000.

 User Code must be 3-6 digits.

 Each User Code can be thought of as a person. As long as each person possesses their own

unique User Code, you can control access to the lock by adding or deleting User Codes. See

"Terminology Used in this Manual" on page 7 for more information.

Users added will default to a Group Association and a Programming Level ability as follows:

USER TYPE

Master Code

Installer Codes

Manager Codes

Supervisor Codes

(Reserved)

Basic User Codes

Basic User Codes Group 1

Basic User Codes Group 2

Basic User Codes Group 3

Basic User Codes Group 4

Basic User Codes

Quick Enable User 300 Code

(Reserved--see page 8)

Guard Tour Code*

Service Code

Basic User Codes

*This code is a Non-Pass code and therefore does not allow passage through the door.