Alarm Lock DL1200 Mounting And Installation Instructions Manual

Alarm Lock DL1200 Mounting And Installation Instructions Manual

Narrow stile access locks

Advertisement

345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ
Symbol: NSSC
© ALARM LOCK 2006

GENERAL DESCRIPTION

The DL1200, DL1300 and PDL1300 are manually program-
mable narrow stile entry trim for Adams Rite
4900 deadlatch locks, and 1850, 1950, 4070, MS1850S and
MS1950S series deadbolts for narrow stile aluminum doors*.
The DL1200, DL1300 and PDL1300 will retract the existing
®
Adams Rite
latch when an access code is entered (or a cre-
dential is presented) and the lever is pressed down (or the
turnpiece turned). The trim is designed to operate with any
®
Adams Rite
interior device such as a "pushpaddle" or lever.
®
Because Adams Rite
trim exists on the inside, the "hold-back
feature remains operational for a continuous unlatched func-
®
tion (see Adams Rite
mode function code activates latched passage mode (device
is unlocked but the lever or turnpiece is engaged continuously)
until another passage mode function code is entered, re-
locking the trim. All locks are equipped with a mechanical
metal key override. See OI310, OI311 or OI312 for program-
ming information.

MECHANICAL FEATURES

The overall enclosure housing is 14 3/8" inches high, 1 5/8"
inches deep and 1¾" inches wide. The trim is through-bolted
to the stile of the door (using four #10 screws) and are se-
cured on the interior side of the door. Supported stile thick-
ness is 1¾".
• DL1200 Series supports 100 users, fingertip/keypad pro-
grammable
• DL1300 Series supports 2000 users and includes 40,000
event audit trail and 500 event schedule. Keypad or PC
programmable
• PDL1300 Series supports 2000 PIN or Prox users and
includes 40,000-event audit trail and 500 event schedule.
Keypad or PC programmable
• Aluminum door retrofit outside trim for Adams Rite
1850, 1950, 4710, 4070, 4730, 4900, MS1850S and
MS1950S Series locks
®
• Familiar Trilogy
programming & electronics
• All-metal, vandal-resistant 12-button keypad supports 3-6
digit PIN codes (3-5 digits on the DL1200), and multilevel
user hierarchy (master, manager, supervisor and basic
users)
• Keypad or PC programmable (see model information).
Quickly and easily add or delete users and enter
DL1200 - DL1300 - PDL1300
MOUNTING AND INSTALLATION
®
4710, 4730 and
instructions).
Entering a passage
NARROW STILE ACCESS LOCKS
INSTRUCTIONS
"passage mode", service codes, group lock-out &
group-enable
• HID Prox ID cards, keyfobs and prox tags supported in
PDL1300 series which features built-in Prox reader
(High security applications can require use of both PIN
code plus Prox ID card for access)
• Real time clock and PC programmable automatic lock/
unlock scheduling for 500 events (1300 Series models)
• Wide weatherproof operating range from -31 to 151ºF
(-35 to 66C)
• Provides 100,000 operations using off-the-shelf long
life DL123A lithium batteries, and includes audible and
visual low battery alert
• Non-handed; fully field-reversible
• Mechanical key override; interchangeable cores sup-
ported (Corbin/Russwin, Yale, Schlage, Medeco)
• Mortise Cylinder, 1¼" supplied (supports 1-1/8", 1¼",
1-3/8" and 1½"
• Compact styling 14-3/8"H x 1-5/8"D x 1¾"W
• Backsets 31/32",1-1/8" and 1½"; stile thickness 1¾"
GENERAL DESCRIPTION .............................................1
MECHANICAL FEATURES ............................................1
MOUNTING AND INSTALLATION .................................2
INSTALL CYLINDER .................................................3
VERIFY HAND ...........................................................3
®
INSTALL LEVER ........................................................4
INSERT INTERFACE CYLINDER .......................4
INSTALL LOCK ....................................................5
INSTALL BATTERIES ..........................................6
TEST OPERATION .........................................................7
NAPCO LIMITED WARRANTY ......................................8
*Adams Rite Manufacturing Co., Pomona, CA. www.adamsrite.com. All products, product
names and services described in this manual are for identification purposes only and may be
trademarks of their respective companies.

TABLE OF CONTENTS

WI1458D 10/06
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DL1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alarm Lock DL1200

  • Page 1 INSTRUCTIONS For Sales and Repairs 1-800-ALA-LOCK For Technical Service 1-800-645-9440 Publicly traded on NASDAQ Symbol: NSSC © ALARM LOCK 2006 WI1458D 10/06 GENERAL DESCRIPTION "passage mode", service codes, group lock-out & group-enable The DL1200, DL1300 and PDL1300 are manually program- ®...
  • Page 2: Mounting And Installation

    Mechanical Override Cylinder Cams The DL1200 and DL/PDL1300 trim requires the use of an oval Alarm Lock cam (supplied with cylinder). For other manufacturers, please see the charts below. Cams for Standard Mortise Cylinders Corbin-Russwin...
  • Page 3 Note: The trim is manufactured to use a 1-1/8" or 1¼" Alarm Lock mortise cylinder with a Fig. 1c: Use 1/16" hex wrench to screw in the cylinder back stop screw HW-1302 cam.
  • Page 4 • Remove the retaining ring with a screwdriver. four mounting holes. • IMPORTANT!--Drill • Remove the pin, then flip over the hook cam lever. holes STRAIGHT THROUGH the door, or the through-bolts will not fit in the lock! THIS IS ESSENTIAL! Drill slowly and STRAIGHT through the door.
  • Page 5 5c. The interface cylinder must be centered and posi- Install Lock tioned flush with (or slightly below) the surface of the 6. Install the DL lock onto the door by aligning the two door (see Fig. 7). posts on the front of the interface cylinder with the two corresponding holes in the back of the DL lock.
  • Page 6 Install Batteries 7b. Install battery pack into the battery compartment. 7. Insert key in cylinder and turn counterclockwise. This Neatly push all wiring inside the compartment. Hold- will allow access to the battery compartment screw. ing battery in place, slide cover back on. With the supplied 5/64"...
  • Page 7 TEST LOCK OPERATION 4. Turn key clockwise and remove key. Before testing, be sure the lock has been powered- The lever must not retract the latch when pressed up using the specific instructions in the OI310, down. OI311 or OI312 manuals. 1.
  • Page 8: Alarm Lock Limited Warranty

    ALARM LOCK will, In no event shall ALARM LOCK be liable for an within said period, at its option, repair or replace any amount in excess of ALARM LOCK's original selling...

This manual is also suitable for:

Dl1300Pdl1300

Table of Contents

Save PDF