Change Existing Master Code; Add/Change Manager Codes; Add/Change User Codes; Deleting Codes - Alarm Lock Trilogy DL1200 Programming Instructions Manual

Change Existing Master Code*

For new locks, follow the "Quick Start" on page 2.
[
__ __ __ __ __
Old (or "Factory") Master Code

Add/Change Manager Codes

Follow the "Quick Start" on page 3. Note: You can also add/change the Manager Code in location
00 by entering the Master Code,
[
__ __ __ __ __

Add/Change User Codes

Follow the "Quick Start" on page 3.
[
Deleting Manager & User Codes
Follow the "Quick Start" on page 3.
[
__ __ __ __ __
Master or Manager Code**

Disable/Enable Users

Enter the Master Code to disable/enable any Manager or User, or enter a Manager Code to disable any User
within the Manager's Bank.
Disable User Number
Enable User Number
*
Once the number of digits is selected, it cannot be changed unless all programming is erased and the Factory Default settings are re-loaded
(power must be removed and re-applied as per the "Erase All Programming" procedure found on page 11.
**
Required only if DL1200 is locked.

Programming Functions

; 1 ;
]
; 1 ;
[
; __
; 2 ;
]
;
Master Code**
Manager Bank (Column) 0-9
[ ]
; __ __
]
__ __ __ __ __ ;
Master Code or
Manager Code**
Bank (Column)
0-9
; [ _ _ ]
]
;
Manager Bank (Column)
0-9
[
__ __ __ __ __
Master or Manager Code
[
__ __ __ __ __
Master or Manager Code
[
__ __ __ __ __
New Master Code*
]
0 ;
then the new Manager Code.
[ ] [
__ 0 ; __ __ __ __ __
User (Row) Always zero for Managers
;
[ ] [
__ __ ; __ __ __ __ __
New User Code
User (Row)
1-9
; :
[ _ _ ] ; :
User (Row) Always zero for Managers
0-9
]
;
]
;
] [
; __ __ __ __ __
Confirm New Master Code*
]
New Manager Code
]
[ ]
__ __ ;
(Allow system to relock)
Bank/User Number
[ ]
__ __ ;
(Allow system to relock)
Bank/User Number
]
7