Table of Contents
Advertisement
1.3
UPS Standard Features
Eaton Power Xpert 9395P UPS (300 kVA, 300 kW) Installation and Operation Manual
The UPS has many standard features that provide cost‐effective and consistently
reliable power protection. The descriptions in this section provide a brief overview of
the UPS standard features.
1.3.1
Installation Features
Each UPS section is shipped separately. The sections are mechanically and electrically
joined at the installation site, and can be permanently bolted to the floor.
Power wiring can be routed through the top or bottom of the cabinet with
connections made to easily accessible terminals. Control wiring is routed through the
top of the cabinet and must be installed in accordance with Class 1 wiring methods.
1.3.2
Control Panel
The control panel, located on the front of the UPS is a 10-inch color touchscreen to
control the operation of the UPS and to display the status of the UPS system. See
Chapter 7, "UPS Operating Instructions," for additional information.
1.3.3
Customer Interface
S
Building Alarm Monitoring – Up to five inputs in the UPS are available to connect the
facility's alarm system contacts. Some system configurations may limit the
number of inputs available. The UPS uses these inputs to monitor the building
alarms in addition to the UPS status. See Chapter 8, "Communication," for
additional information.
S
Alarm Contact – One alarm contact is provided for connection to equipment at the
facility, such as a light, an audible alarm, or a computer terminal. The equipment
connected to this contact alerts you to a UPS alarm. See Chapter 8,
"Communication," for additional information.
S
X-Slot Communication Bays – Four communication bays are standard equipment.
One to four optional X-Slotslot inline (for generic slot name; ie: Avaya's alarm
adapter) connectivity cards can be installed in the UPS module at any time. X-Slot
cards are quickly installed at the front of the UPS and are hot-pluggable. See
Chapter 8, "Communication," for additional information.
1.3.4
Advanced Battery Management
A three-stage charging system increases battery service life by optimizing recharge
time, and protects batteries from damage due to high current charging and inverter
ripple currents. Charging at high currents can overheat and damage batteries.
1.3.5
Power Management Software
Intelligent Power Management and Intelligent Power Protector software are available
through Eaton support. See Chapter 8, "Communication," for additional information.
S
P-164000563 Rev 1 www.eaton.com/powerquality
INTRODUCTION
1-3
Advertisement
Table of Contents
