Setting The Audio Agc; Adjusting The Display Contrast; Initializing The Scanner's Memory - Uniden BCD396T Owner's Manual

• Keypress The backlight turns on when any key
is pressed then stays on for 10 seconds.
• Infinite The backlight turns on when you
press
Pressing any key while the backlight is on extends the
backlight period. Pressing
turns off the backlight.

Setting the Audio AGC

Menu
• On Audio AGC is turned on.
• Off Audio AGC is turned off.
This setting helps balance the audio level you hear as
you listen to different radio sources so you can hear
them at a similar volume. Use this setting if you listen
to an audio source that has natural changes in audio
level for which you want to compensate.

Adjusting the Display Contrast

Menu
Adjust Contrast
Contrast 1 - 15 the scanner adjusts the display to
the contrast level you select.
This setting controls the display's contrast (how light
or dark it appears). Use this setting to change the
contrast for different viewing conditions. There are 15
contrast settings. You see the change in contrast as
you scroll through the settings.

Initializing the Scanner's Memory

Important! This deletes all preprogrammed data.
You cannot restore preprogrammed data that has
been deleted.
To initialize the scanner's memory, turn off the
scanner. Then, press 2, 9, and Hold while turning it on.
then stays on until you press
Settings
Settings
while the backlight is on
Set Audio AGC
Other Settings
again.
55