Custom Search - Uniden BCD396T Owner's Manual

Custom Search

Custom Search lets you program and search 10
custom search ranges. You can search any of these
ranges simultaneously and select each custom search
range you set. During custom search, the scanner
searches starting with the lowest frequency in the
search range you select to the highest frequency in
the range.
Notes:
• Search ranges are preset. See "Editing a Custom
Search Range" on Page 94 to change the range.
• You cannot turn off all custom search ranges.
1. Press
Search for ... appears. Then press the scroll
control. Or, press
No. One of the search feature options appear.
2. Turn the scroll control until Custom Search
appears, then press the scroll control to select it.
The scanner starts custom search of the custom
search range you selected, stopping on any trans-
mission it finds and displaying the frequency.
Turn the scroll control to change the search
direction. An arrow appears, showing the current
search direction.
To turn search ranges on or off, press 0 and 1-9.
To hold searching, press Hold. To resume searching,
press
Func
To lock out a frequency found while searching, press
L/O. Search Lockout? appears. Press the scroll
control to lock out the frequency or No to continue
monitoring.
If you turn off the active custom search range, the
scanner skips to the next custom search range and
continues searching.
then turn the scroll control until
Menu
then press Scan/Srch or Hold again.
+ Scan/Srch, then select
Func
Searching and Storing
93