Quick Search; Ctcss/Dcs Search - Uniden BCD396T Owner's Manual

Notes:
• If all frequencies in the search band you selected
are locked out, All Locked! appears and the
scanner does not search the band.
• If the service you select uses channels (such as
CB radio or marine), the scanner displays the
service channel number.

Quick Search

Quick Search lets you search from the currently-tuned
frequency if you are scanning a conventional system
or sets the system to ID search if you are scanning a
trunked system.
If you are on a conventional system or channel, press
and Scan/Srch to start quick search. Quick
Func
Search Yes = E / No = "." appears.
Qck Search Hold appears if you press Hold.
Press E to start quick search or No to go to the search
menu.

CTCSS/DCS Search

CTCSS/DCS Search lets you search for CTCSS or
DCS tones when it finds an active frequency in search
and Close Call modes. You can identify up to 50
CTCSS tones and 104 DCS codes.
Turning this option on lets the scanner search for
CTCSS/DCS tones. If the scanner detects the tone, it
displays the tone's frequency and DCS code.
1. Press
Srch/CloCall Opt appears. Then press the
scroll control. One of the search feature options
appear.
2. Turn the scroll control until CTCSS/DCS Search
appears, then press the scroll control to select it.
3. Turn the scroll control until On appears to turn on
CTCSS/DCS search or until Off appears to turn it
off, then press the scroll control.
92
then turn the scroll control until
Menu
Searching and Storing