Setting The Audio Agc; Adjusting The Display Contrast - Uniden BCD396T Owner's Manual

• Keypress The backlight turns on when any key
is pressed then stays on for 10 seconds.
• Infinite The backlight turns on when you
press then stays on until you press
Pressing any key while the backlight is on extends the
backlight period. Pressing
turns off the backlight.

Setting the Audio AGC

Settings
Menu
This setting helps balance the audio level you hear as
you listen to different radio sources so you can hear
them at a similar volume. Use this setting if you listen
to an audio source that has natural changes in audio
level for which you want to compensate.
Analog Rotate the scroll control to select. This
setting lets you set the audio AGC for receiving analog
channels.
• On Press the scroll control to select. Audio AGC is
turned on.
• Off Press the scroll control to select. Audio AGC
is turned off.
Digital Rotate the scroll control to select. This
setting lets you set the audio AGC for receiving digital
channels.
• On Press the scroll control to select. Audio AGC is
turned on.
• Off Press the scroll control to select. Audio AGC
is turned off.

Adjusting the Display Contrast

Settings
Menu
Adjust Contrast
Contrast 1 - 15 the scanner adjusts the display to
the contrast level you select.
again.
while the backlight is on
Set Audio AGC
Other Settings
55