A Look At The Display - Uniden BCD396T Owner's Manual

A Look At The Display

(illus - show display)
The display has indicators that show the scanner's
current operating status. The display information helps
you understand how your scanner operates. The dark
area shown above the icons in this illustration is the
text display area. Information about the currently tuned
frequency appears here.
SYS - shows the currently activated system, appears
with numbers (0-9). The currently active system
indicator flashes.
ATT - appears when the attenuation feature is turned
on (see "Setting System Attenuation (Trunked Sys-
tems Only)" on Page 81).
PRI - appears when the priority feature is turned on
(see "Priority Scan" on Page 54).
- appears when you lock the keypad (see
"Locking/Unlocking the Keypad" on Page 53).
- alerts you when the battery power gets low.
GRP - shows the currently activated group, appears
with numbers ( - ). The currently active group
0 9
indicator flashes.
AM/FM/NFM - appears to show the type of transmission.
L/O - appears when you manually select a channel
you locked out or a skip frequency.
F
- appears when you hold down to select a
Func
function.
- appears when the scanner is set to a Close Call
feature mode (see "Using the Close Call Feature" on
Page 100).
Setting Up Your Scanner
41