Setting The Audio Agc; Adjusting The Display Contrast; Initializing The Scanner's Memory; Connecting Your Scanner To A Personal Computer - Uniden UBC3500XLT Owner's Manual

Scanning receiver

Hide thumbs Also See for UBC3500XLT:

Table of Contents

Pressing any key while the backlight is on extends the

backlight period. Pressing

turns off the backlight.

Setting the Audio AGC

Settings

Set Audio AGC

This setting helps balance the audio level you hear as

you listen to different radio sources so you can hear

them at a similar volume. Use this setting if you listen

to an audio source that has natural changes in audio

level for which you want to compensate.

• On Press the scroll control to select. Audio AGC is

turned on.

• Off Press the scroll control to select. Audio AGC

is turned off.

Settings

Adjust Contrast

Contrast 1 - 15 the scanner adjusts the display to

the contrast level you select.

This setting controls the display's contrast (how light

or dark it appears). Use this setting to change the

contrast for different viewing conditions. There are 15

contrast settings. You see the change in contrast as

you scroll through the settings.

1. Turn off the scanner.

2. Press 2, 9, and Hold while turning on the scanner.

All Memory Clear Please Wait appears.

Connecting Your Scanner to a

Personal Computer

To connect your scanner to a personal computer, you

must first set the scanner's baud rate (the rate at

while the backlight is on

Table of Contents