Uniden BCD396T Owner's Manual page 119

Scanner
won't
track a
trunked
system.
(continued)
Scanner
won't stop
scanning
a trunked
system.
Scanner
won't
acquire
the data
channel.
Missing
replies to
conver-
sations.
The system you
are trying to scan
might be LTR or
EDACS.
No ID's have been
programmed.
The ID's you have
stored are not
active.
The squelch might
need to be
adjusted.
The frequency
used for the data
channel might be
missing.
The scanner might
need to be
changed to a Type
1 scanner setup.
The fleet map
might be incorrect.
One or more of
the system's
frequencies might
not be entered.
The system you
are trying to scan
might be LTR or
EDACS.
Set the scanner to
scan LTR or EDACS
systems. Review
"Programming LTR
Systems" on Page 69
and "Programming
EDACS Systems" on
Page 66.
Program one or more
ID's or use the ID
Search mode.
Wait for the ID's to
become active or scan
another system.
Adjust the squelch
threshold. See
"Turning On the
Scanner and Setting
the Squelch" on
Page 43.
Check your frequency
list for the data
channel.
Change to a Type 1
scanner setup. See
"Programming
Motorola Systems" on
Page 62.
Try another preset fleet
map or program your
own fleet map.
Make sure all the
system's frequencies
have been entered.
Set the scanner to
scan LTR or EDACS
systems. Review
"Programming LTR
Systems" on Page 69
and "Programming
EDACS Systems" on
Page 66.
Troubleshooting
119