Setting Channel Lockout; Deleting Channels - Uniden BCD396T Owner's Manual

Set Step
This setting selects the frequency step used for setting
the channel's. Select your setting, then press E.
Auto - the step is based on the band (see the table at
the front of the manual)
5.0 kHz, 6.25 kHz, 7.5 kHz, 10.0 kHz, 12.5 kHz, 15.0
kHz, 20.0 kHz, 25.0 kHz, 50.0 kHz, 100.0 kHz - The
scanner uses the selected step.
Note: The scanner defaults to Auto.

Setting Channel Lockout

Program System
Menu
Select the system
Edit Group
Select the group
Edit Channel
Select the channel
Set Lockout
This setting determines whether the scanner will scan
this channel when its system and group are enabled.
Select your setting, then press E.
Lockout - the channel is not scanned.
Unlocked - the channel is scanned.
Notes:
• The default setting is Unlocked.
• You can also lock or unlock a channel by selecting
it while scanning or holding, then pressing L/O.
See "Basic Operation" on Page 43.

Deleting Channels

Program System
Menu
Select the system
Edit Group
Programming/Editing Optional Settings
E
E
E
E
89