Entering/Editing Ltr Channels/Talkgroups - Uniden BCD396T Owner's Manual

The scanner creates a group with a default name of
Group nn. nn increments by one for each new group
you create within a system.
Next, refer to the appropriate section to set group-wide
options:
• See "Entering/Editing the Group Name" on
Page 82
• See "Setting the Group Quick Key" on Page 83
• See "Setting Group Lockout" on Page 83
• See "Deleting Groups" on Page 83
• See "Entering/Editing LTR Channels/ Talkgroups"
on Page 71
Entering/Editing LTR Channels/
Talkgroups
Refer to the appropriate section to change a
channel setting:
• See "Editing the Channel Name" on Page 84
• See "Setting Channel Lockout" on Page 89
• See "Deleting Channels" on Page 89
• See "Copying/Pasting Channels" on Page 90
To program another channel within the same group,
press
Menu
To create another channel group and enter more
channels, press
"Setting Up a Channel Group" on Page 70.
To direct-enter LTR talkgroups, follow the steps under
"Quick-Storing Channels or Talk Group ID's" on
Page 47.
, then repeat the above.
four times, then proceed from
Menu
Programming Radio Systems
71