Setting The Auto Squelch | Monitor - Uniden UH6060 Owner's Manual

Operation
Setting the Auto Squelch
The Squelch circuit determines when the radio's audio output (speakers)
turn on, based on the strength of received signals. This avoids noise and
undesired signals constantly coming through the speakers.
The Auto Squelch feature has an Off setting and 9 preset squelch levels:
oF (off) - squelch is fully open to noise & signals.
1 - max sensitivity (min squelch):
5 - med sensitivity (med squelch):
9 - min sensitivity (max/tight squelch):
It requires no adjustment.
1. Press [SQL].
The squelch setting flashes.
2. Press /
3. Press [SQL] again to store the setting.
Monitor
Press and hold [SQL] to open the
squelch and receive all weak signals.
Press and hold [SQL] to cancel.
UNIDEN UH6060
Weak (distant) signals can open the squelch.
to change the setting.
Equivalent to Monitor Mode
Medium and strong signals can open the squelch.
Strong/nearby signals can open the squelch.
CALL
SCAN
CALL
13
EMG SQL INST
MENU
DCS
CTCSS
SQL INST
EMG
MENU
DCS
SCAN
CTCSS
UHF CB Transceiver