Entering/Editing Motorola Channels; Programming Edacs Systems - Uniden BCD396T Owner's Manual

• See "Entering/Editing Motorola Channels" on
Page 66
• See "Setting I-Call (Motorola Analog and EDACS
Systems Only)" on Page 77

Entering/Editing Motorola Channels

Refer to the appropriate section to change a
channel setting:
• See "Setting the Digital Decode Threshold (Motor-
ola and Conventional Systems Only)" on Page 79
• See "Editing the Channel Name" on Page 84
• See "Setting Channel Lockout" on Page 89
• See "Deleting Channels" on Page 89
• See "Copying/Pasting Channels" on Page 90
To program another channel within the same group,
press
Menu
channel group and enter more channels, press
three times, then proceed from "Entering/Editing
Motorola Channel Groups" on Page 65.

Programming EDACS Systems

Program System
Menu
New System
EDCS
Confirm? Yes="E" / No="."
Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.
• WIDE - Use for wideband EDACS systems
• NARROW - Use for narrowband EDACS systems
• SCAT - Use for EDACS SCAT (Single Channel
Autonomous Trunking)
Confirm? Yes="E" / No="."
66
, then repeat the above. To create another
Programming Radio Systems
Menu