Uniden BCD396T Owner's Manual page 33

Before installing batteries, set the switch in the battery
compartment to match the type of batteries you will
use. Select REG. ALK. BATT. for non-rechargeable
battery types and NI-MH. BATT. for rechargeable
battery types. See also "Using Rechargeable Batter-
ies" on Page 34 when you use rechargeable batteries.
1. Remove the battery cover and set the battery
switch.
2. Install 3 AA batteries, matching the polarity sym-
bols (+ -).
(illus - show batteries being
installed in batt compartment)
WARNING!
Set REG. ALK. BATT./NI-MH. BATT. to NI-MH.
BATT. for use only with rechargeable batteries.
Never attempt to recharge non-rechargeable
batteries. Non-rechargeable batteries can get hot
and can even burst if you try to recharge them.
(illus - show battery compartment
open and stylus pointing to
battery switch)
Setting Up Your Scanner
33