Connecting Your Scanner To A Personal Computer; Using The Cloning Options - Uniden BCD396T Owner's Manual

Connecting Your Scanner to a
Personal Computer
To connect your scanner to a personal computer, you
must first set the scanner's baud rate (the rate at
which data is transferred between the scanner and the
computer, in bits per second (bps)).
Hint: If you have trouble transferring data between
your scanner and your computer, try setting the baud
rate to a slower setting.
Use the included connection cable to connect your
scanner to another BCD396T scanner or your
personal computer.
Menu
PC Control
PC Control Lets you set the baud rate your
scanner uses to communicate with a personal
computer.
• Off The baud rate is not set.
• 9600 bps The baud rate is set to 9600 bps.
• 19200 bps The baud rate is set to 19,200 bps.
• 38400 bps The baud rate is set to 38,400 bps.
• 57600 bps The baud rate is set to 57,600 bps.
• 115200 bps The baud rate is set to 115,200 bps.

Using the Cloning Options

Lets you set your scanner as a master (source) or
slave (recipient), letting you transfer programming to
or from another BCD396T scanner. See "Wired Clon-
ing" on Page 57 and "On-Air Cloning" on Page 58.
56
Settings
Other Settings