Turning Power Save On Or Off; Priority Scan; Other Settings; Using The Backlight - Uniden BCD396T Owner's Manual

Turning Power Save On or Off

Menu
Set Battery Save
• On The scanner goes into low-power mode when
you monitor a conventional channel that has no
activity.
• Off Power save is off.

Priority Scan

Menu
Or, while holding on any channel, press
to select one of these priority modes:
• Off Normal scanning
• On While scanning a conventional system, the
scanner interrupts every 2 seconds and checks
the priority channels in each unlocked
conventional system. Priority channels in lower
priority key numbered systems (starting from 1)
have highest priority. Pri appears when you
select this mode.
• Plus On The scanner only scans priority
channels in unlocked conventional systems.
Pri flashes when you select this mode.

Other Settings

Using the Backlight

Menu
Set Backlight
• 10 sec The backlight stays on for 10 seconds
after you press
• 30 sec The backlight stays on for 30 seconds
after you press
• Squelch The backlight turns on when the
squelch opens then stays on for 5 seconds.
54
Settings
Set Priority
Settings
.
.
+ 1/Pri
Func
Other Settings