Using Menu
Press
Menu
menu. See "Using the Menu" on Page 49 for more
information about the scanner's menu options.
Using Func
To select the function labeled below a key on the front
of the scanner, hold down
scanner, then press that key. To hold on a system
while scanning or temporarily stop on a channel while
searching, press
Scan Hold mode, hold down
control.
42
(illus - show left side
of scanner)
Menu
on the left side of the scanner to enter the
Func
(illus - show left side
of scanner)
. To select a system in Scan or
Func
Setting Up Your Scanner
on the left side of the
Func
and rotate the scroll
Func