Setting The Auto Squelch | Monitor - Uniden X76 Owner's Manual

Operation
Setting the Auto Squelch
The Squelch function is the radio's signal filter. It determines when the
radio's speakers turn on, based on the strength of received signals.
This avoids background noise and undesired signals constantly coming
through the speakers.
The Auto Squelch feature has an Off setting and 9 preset squelch levels:
oF (off) - squelch is fully open to noise & signals.
Equivalent to Monitor Mode
1 - max sensitivity (min squelch):
Weak (distant) signals can open the squelch.
5 - med sensitivity (med squelch):
Medium and strong signals can open the squelch.
9 - min sensitivity (max/tight squelch):
Strong/nearby signals can open the squelch.
It requires no adjustment.
1. Press [SQL].
The squelch setting flashes.
2. Press / to change the setting.
3. Press [SQL] again to store the setting.
Monitor
The Monitor mode is basically the
squelch function turned off.
Press and hold [SQL] to open the
squelch and receive all weak signals.
Press and hold [SQL] to cancel.
13
UNIDEN X76 UHF CB Transceiver