Programming Motorola Systems - Uniden BCD396T Owner's Manual

• See "Deleting Channels" on Page 89
• See "Copying/Pasting Channels" on Page 90
To create another channel group and enter more
channels, press
"Setting Up a Channel Group" on Page 61.

Programming Motorola Systems

Program System
Menu
New System
MOT
Next, rotate the scroll control to select the type of
Motorola system you want to program, then briefly
press the scroll control to select it.
• 800MHz Standard - Use for 800 MHz systems
that use the standard band plan
• 800MHz Splinter - Use for 800 MHz systems
that use the splinter band plan (typically near
international borders)
• 900MHz Band - Use for 900 MHz systems
• VHF band - Use for VHF systems
• UHF band - Use for UHF systems
• P25 - Use for Motorola Astro APCO 25 Digital
systems in any band
Confirm? Yes="E" / No="."
Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the
default. However, for the items in bold, you must enter
information in order for your scanner to scan the
system.
• See "Editing the System Name" on Page 72
• See "Editing the System Quick Key" on Page 73
• See "Setting System Lockout" on Page 73
• See "Setting the System Hold Time" on Page 74
62
four times, then proceed from
Menu
Programming Radio Systems