Finding Repeater Output Frequencies - Uniden BCD396T Owner's Manual

• NOAA WX - the scanner skips known NOAA
weather frequencies.
• Band 1-10 - select the band where you want to
screen out broadcast sources.
Program Band - lets you program a specific band for
broadcast screen. Turn the scroll control to select an
option then press the scroll control to change the
setting.
• Band 1-10 - select the band where you want to
screen out broadcast sources.
Set Lower Limit - turn the scroll control to
enter the lower limit of the frequency range,
then press the scroll control to set it.
Set Upper Limit - turn the scroll control to
enter the upper limit of the frequency range,
then press the scroll control to set it.
Finding Repeater Output
Frequencies
Menu
Repeater Find
This feature sets whether the scanner tries to tune to a
repeater output frequency during Close Call operation
when it detects a transmission on a repeater input
frequency. Since you can normally only hear one side
of a conversation when you listen to an input frequency
transmission, turning this feature on can let you hear
both sides of the conversation.
On The scanner automatically applies repeater
reverse to detected transmissions. If the scanner
detects the transmission on the output frequency, it
beeps, Repeater Find appears, and it remains on
the output frequency until transmissions end. If it does
not detect a transmission on the output frequency, it
remains on the original frequency.
106
Srch/CloCall Opt
Search and Close Call Options