Setting System Frequencies; Entering/Editing Ltr Channel Groups - Uniden BCD396T Owner's Manual

• See "Setting the Channel Delay Time" on Page 74
• See "Setting ID Scan/Search (Trunked Systems
Only)" on Page 75
• See "Reviewing Locked Out Frequencies" on
Page 104
• See "Setting Channel Attenuation (Conventional
Channels Only)" on Page 88
• See "Deleting Systems" on Page 81
• See "Copying Systems" on Page 81
• See "Setting System Frequencies" on Page 70
• See "Entering/Editing LTR Channel Groups"
on Page 70

Setting System Frequencies

Program System
Menu
Select the system
Set Frequencies
New Frequency
Input a system frequency, then press the scroll control.
The scanner then prompts you to enter the LCN for
the entered frequency. Enter the LCN, then press the
scroll control.
To enter additional frequencies, press
scroll control to select New Frequency, then repeat
the above.

Entering/Editing LTR Channel Groups

To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Setting Up a Channel Group
Program System
Menu
Select the system
Edit Group
70
Programming Radio Systems
, use the
Menu