Table of Contents
Advertisement
Settings List
Feature Properties
: Settings that can only be configured when image acquisition on the camera is stopped.
Item
a) Device Control
Device Vendor Name
Device Model Name
Device Manufacturer Info
Device Version
Device Firmware Version
Device Serial Number
Device User ID
Device Temperature Selector
Device Temperature (C)
Device Reset
b) Image Format Control
Sensor Width
Sensor Height
Width Max
Height Max
Width
Height
Offset X
Offset Y
Binning Horizontal Mode
(GO-5100M-USB only)
Binning Horizontal
(GO-5100M-USB only)
Binning Vertical Mode
(GO-5100M-USB only)
Binning Vertical
(GO-5100M-USB only)
Setting range
—
—
—
—
—
—
Any
Mainboard
—
—
2464
2056
—
—
Binning Off: 16 to 2464
Binning 2 On: 16 to 1232
GO-5100M-USB:
Binning Off: 1 to 2056
Binning 2 On: 1 to 1028
GO-5100C-USB: 2 to 2056
Binning Horizontal 1: 0 to
2448
Binning Horizontal 2: 0 to
1216
GO-5100M-PGE:
Binning Vertical 1: 0 to
2055
Binning Vertical 2: 0 to
1027
GO-5100C-PGE: 0 to 2054
Sum, Average
1, 2
Sum
1, 2
— 48 —
GO-5100M-USB / GO-5100C-USB
Default value
Display/configure information related to
the device.
"JAI Corporation"
Display the manufacturer name.
GO-5100M-USB
Display the model name.
GO-5100C-USB
See the
Display the device information.
possibilities
—
Display the hardware version.
—
Display the firmware version.
—
Display the device ID.
—
Set the user ID for the camera.
Mainboard
Select the area of the camera's interior for
which to display the temperature sensor's
reading.
—
Display the internal temperature (˚C) of
the camera.
—
Reset the device.
Configure image format settings.
2464
Display the maximum image width.
2056
Display the maximum image height.
2464
Display the maximum image width.
2056
Display the maximum image height.
2464
Set the image width.
2056
Set the image height.
0
Set the horizontal position.
0
Set the vertical position.
Sum
Set the addition process to be used
during horizontal binning.
1
Set the number of pixels in the horizontal
direction for which to perform binning.
Sum
Display the addition process to be used
during vertical binning.
1
Set the number of pixels in the vertical
direction for which to perform binning.
Description
Advertisement
Table of Contents
