IAI GO-5100M-USB User Manual page 41

As with Trigger Sequencer, [Sequencer LUT Mode] defines whether Gamma or LUT is to be applied
to the sequence. If Gamma is selected, the Gamma setting defined in the camera's Analog Control
section will be applied to all exposures in the sequence. If LUT is selected, the LUT characteristics
defined in Analog Control will be applied to any index where [Sequencer LUT enable] has been set to
ON.
[Sequencer Index Frame Count], [Sequencer ROI Next Index], and [Reset Sequencer Index] are not
used in Command Sequencer mode and entered values are ignored.
Command Sequencer Example
User-defined Indexes (up to 128)
ROI
Exposure
Gain
LUT
Binning
Set to
Index1
Command
Sequencer
Index
Camera
Triggers
Image
Frames
Settings
Index1
Used
Settings
Index structure for Command Sequencer
Index
Selector
(MUX)
Current
Index
Common Settings
Command Sequencer Index (1 to 128)
Index1 Index2
ROI
Exposure
Gain
LUT
Binning
Set to Set to Set to
Index3 Index1 Index2
Index3 Index1
Settings Settings
ROI1
Index1 Exposure1
Index2 ROI2 Exposure2
ROI128
Index128
— 41 —
Index3
ROI
Exposure
Gain
LUT
Binning
Set to
Set to
Index1
Index2
Index2 Index1
Settings Settings
Black
Gain1
(M/Red/Blue) Level1
Gain2
Black
(M/Red/Blue) Level2
Exposure Gain128 Black
128 Level128
(M/Red/Blue)
Common Settings
Sequencer LUT mode
GO-5100M-USB / GO-5100C-USB
Index2
Settings
LUT
Binning1
Enable1
(H/V)
Binning2
LUT
(H/V) Enable2
Binning128 LUT
Enable128
(H/V)