IAI GO-5100M-USB User Manual page 51

Item
g) Counter And Timer Control
Counter 0 to 2
Counter 0 to 2 Event
Source
Counter 0 to 2 Event
Activation
Counter 0 to 2 Reset
Counter 0 to 2 Refresh
Counter 0 to 2 Value
Counter 0 to 2 Status
h) User Set Control
User Set Selector
User Set Load
User Set Save
i) Sequencer Control
Sequencer Mode
Sequencer Mode Select
Sequencer Configuration Mode
Sequencer Set Selector
Sequencer Frame Number
Sequencer Set Next
Sequencer Width
Sequencer Height
Sequencer Offset X
Sequencer Offset Y
Sequencer Gain
Sequencer Gain Red
Sequencer Gain Blue
Sequencer Exposure Time (µs)
Sequencer Black Level
Sequencer LUT Enable
Sequencer H Binning
(GO-5100M-PGE only)
Sequencer V Binning
(GO-5100M-PGE only)
Sequencer Repetition
Sequencer LUT Mode
Sequencer Set Active
Setting range
Counter 0 to 2
Off,
Frame Trigger,
Frame Start,
Exposure Start,
Exposure Transfer End
Rising Edge,
Falling Edge
—
—
—
Counter Active
Default,
User Set1 to User Set3
—
—
On, Off
Trigger Sequencer Mode,
Command Sequencer Mode
On, Off
1 to 128
1 to 255
1 to 128
16 to 2464
2 to 2056
❖ GO-5100M-USB: 1 to
2056
0 to 2448
0 to 2054
❖ GO-5100M-USB: 0 to
2055
100 to 1600
-4533 to 37876
-4533 to 37876
8-bit: 7 to 7999920
10/12 bit: 8 to 7999900
-133 to 255
True, False
1 to 2
1 to 2
1 to 255
Gamma, LUT
—
— 51 —
GO-5100M-USB / GO-5100C-USB
Default value
Configure counter settings. (This camera
only supports counter functions.)
— Display the counter.
Off Select the counter event signal for which
to read the count value.
— Specify the timing at which to count.
— Reset the counter.
— Update the count value.
0 Display the count value.
Counter Active Display the counter status.
Configure user settings.
Default (factory Select the user settings.
default values)
— Load user settings.
— Save the current setting values as user
settings.
Configure sequencer settings.
Off Enable/disable [Sequencer Mode].
Trigger Select the sequencer mode.
Sequencer
Mode
On Select [On] to change the settings within
the index.
1 Select the [Trigger Sequencer] mode and
[Command Sequencer] mode index.
1 Set the number of frames to display for
the selected Sequencer Index. (Enabled
only for Trigger Sequencer.)
1 Set the next index to be displayed for the
selected Sequencer Index. (Enabled only
for Trigger Sequencer.)
2464 Set the width of the selected Sequencer
Index.
2056 Set the height of the selected Sequencer
Index.
0 Set the horizontal offset value for the
selected Sequencer Index.
0 Set the vertical offset value for the
selected Sequencer Index.
100 Set the gain for the selected Sequencer
Index.
0 Set the Red Gain for the selected
Sequencer Index.
0 Set the Blue Gain for the selected
Sequencer Index.
6210 Set the exposure time for the selected
Sequencer Index.
0 Set the black level for the selected
Sequencer Index.
False Enable/disable the LUT setting for the
selected Sequencer Index.
1 Set the horizontal binning for the selected
Sequencer Index.
1 Set the vertical binning for the selected
Sequencer Index.
1 Set the repeat count for the sequencer.
Gamma Set the sequencer LUT mode.
1 Displays the active LUT number.
Description