Table of Contents
Advertisement
Item
Black level
Default level
adjustment
Video level adjustment range
Adjustment range
Resolution adjustment
Gain adjustment
Manual adjustment range
Auto gain
WB gain
WB area
WB range
White balance
Blemish correction
Detection
Correction
Correctable pixels
ALC
Gamma
LUT
Power supply
6-pin
connector
USB bus
power
Lens mount
Flange back
Optical filter
Verified performance temperature / humidity
Storage temperature / humidity
Regulations
Dimensions (housing)
Weight
Approximately 5 minutes of warm-up are required to achieve these specifications.
Package contents
Camera body (1)
Sensor protection cap (1)
Dear Customer (sheet) (1)
Optional accessories (not supplied)
MP-43 tripod mount
AC adapter
Design and specifications are subject to change without notice.
–33LSB to +64LSB against reference level (during 10-bit output)
1 step = x0.01 (0.005 dB to
(varies by setting value)
Interpolation using adjacent pixels (continuous blemishes not
Can be adjusted automatically together with AGC and auto exposure
Input range
Power consumption
Input range
Power consumption
Lens mount protrusion length of 9 mm or less is supported
Protective glass: Not provided
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS,
29 × 29 × 41.5 mm (WHD) (excluding mount protrutions)
— 58 —
GO-5100M-USB / GO-5100C-USB
GO-5100M-USB
33LSB (during 10-bit output)
0 to 100 (during 10-bit output)
1 STEP = 0.25LSB
0 dB to +24 dB
0.08 dB)
Off, Continuous
—
R / B: –7 dB to +15 dB, 1 step =
—
—
—
Detect white blemishes using threshold values
(black blemish correction performed only at factory)
corrected)
512 pixels
0.45, 0.6 and 1.0 (OFF) (3 steps available)
OFF: γ = 1.0, ON = 257 points can be set
DC +12 V to +24 V ±10% (via input terminal)
4.2 W (at 12 V input, full pixel) (Typical)
DC 5 V ±10%
4.35 W (at 5 V input, full pixel) (Typical)
C-mount
17.526, tolerance: 0 mm to –0.05 m
IR cut filter (half value of 670 nm)
–5°C to +45°C / 20% to 80% (non-condensing)
–25°C to +60°C / 20% to 80% (non-condensing)
WEEE
46 g
GO-5100C-USB
0 dB to +24 dB
1 step = x0.01 (0.005 dB to
0.08 dB)
(varies by setting value)
Off, Continuous
0.1 dB
16 (4 × 4) Area
3000 K to 9000 K
Off, Continuous, Once
Advertisement
Table of Contents
