Table of Contents
Advertisement
Item
d) Analog Control
Gain Selector
Gain
Black Level Selector
Black Level
Gain Auto
Balance White Auto
(GO-5100C-USB only)
Gamma
JAI LUT Mode
e) LUT Control
LUT Selector
LUT Index
LUT Value
f) Digital IO Control
Line Selector
Line Mode
Line Inverter
Line Status
LineSource
Line Format
Line Status All
User Output Selector
User Output Value
Setting range
GO-5100M-USB: Analog All
GO-5100C-USB: Analog All,
Digital Red,
Digital Blue
Analog All: 1 to 16
Digital Red & Blue:
0.447 to 5.624
GO-5100M-USB: Digital All
GO-5100C-USB: Digital All,
Digital Red, Digital Blue
–133 to 255
Off, Continuous
Off,
Once,
Continuous
0.45, 0.60, 1.0
Off, Gamma, LUT
GO-5100C-USB:
Red,
Green,
Blue
0 to 256
0 to 4095
Line2 - Opt Out 1,
Line3 - Opt Out 2,
Line5 - Opt In 1,
Time Stamp Reset,
NAND Gate 0 In 1,
NAND Gate 0 In 2,
NAND Gate 1 In 1,
NAND Gate 1 In 2
Input,
Output
True, False
True, False
Low, High,
Acquisition Trigger Wait,
Acquisition Active,
Frame Trigger Wait,
Frame Active,
Exposure Active,
FVAL,
User Output 0,
User Output 1,
Line 5 - Opt In 1,
Pulse Generator 0,
Nand 0 Out,
Nand 1 Out
—
—
User Output 0,
User Output 1
True, False
— 50 —
GO-5100M-USB / GO-5100C-USB
Default value
Configure analog control settings.
Analog All
Select the gain to configure.
Master gain: 1
Set the gain value for the gain setting
R, B: 1
selected in [Gain Selector].
Digital All
Select the black level to configure.
0
Set the black level value.
Off
Enable/disable gain auto adjustment.
Off
Enable/disable auto white balance.
0.45
Set the gamma value.
Off
Select the JAI LUT mode.
Configure LUT settings.
GO-5100C-USB:
Select the LUT channel to control.
Green
0
Set the LUT index table number.
0
Set the LUT value.
Configure settings for digital input/output.
Line2 - Opt Out 1
Select the input/output to configure.
Output
Display the input/output status (whether it
is input or output).
False
Enable/disable polarity inversion for the
selected input signal or output signal.
False
Display the status of the input signal or
output signal (True: High, False: Low).
Low
Select the line source signal for the item
selected in [Line Selector].
Opto Coupled
Display the current I/F type.
0x00
Display the status of the input signal and
output signal.
User Output 0
Set the user output signal.
False
Set the value for the User Output selected
in [User Output Selector].
Description
Advertisement
Table of Contents
