Detailed Settings For Gain Auto (Automatic Gain Level Control) - IAI GO-5100M-USB User Manual

Detailed Settings for Gain Auto (Automatic Gain Level Control)

When [Gain Auto] is set to [Continuous], you can configure the conditions for automatic adjustment in
detail.
ALC Reference
ALC Area Enable All
ALC Area Selector
ALC Area Enable
AGC Max.
AGC Min.
AGC/ASC Control Speed
Auto gain metering areas (16 areas)
High
High
Mid-left
Left
Mid-High Mid-High
Left Mid-left
Mid-Low
Mid-Low
Mid-left
Left
Low
Low
Mid-left
Left
Item
High High
Mid-right Right
Mid-High Mid-High
Mid-right Right
Mid-Low Mid-Low
Mid-right Right
Low Low
Mid-right Right
Specify the target level for automatic gain control. (This
setting is also used for automatic exposure control.)
Select whether to specify all areas as auto gain metering
areas or whether to specify the areas individually.
[0]: Specify areas as auto gain metering areas (16 areas)
individually.
[1]: Specify all areas as auto gain metering areas.
Individually select any of 16 areas for automatic gain
metering. (This setting is also used for automatic exposure
control.)
Select [True] to enable the metering area selected in [ALC
Area Selector], or select [False] to disable it.
Specify the maximum value for the automatic gain control
range.
Specify the minimum value for the automatic gain control
range.
Specify the reaction speed for automatic gain control. (This
setting is also used for automatic exposure control.)
— 43 —
GO-5100M-USB / GO-5100C-USB
Description