www.ti.com
When using decimation and NCO features, click the gear symbol to access the Additional Device Parameters
dialog box to enter the following details:
1. ADC Sampling Rate
2. ADC Input Signal Frequency
3. NCO Frequency
4. Decimation Factor
The HSDC Pro GUI will calculate the ADC Output Data Rate based on these inputs. The Fundamental and
Harmonic frequency locations will also be calculated and identified in the FFT display.
SLAU640A – APRIL 2019 – REVISED JUNE 2021
Submit Document Feedback
Figure 3-4. High Speed Data Converter Pro (HSDC) GUI
Copyright © 2021 Texas Instruments Incorporated
Setup Procedure
ADCxxDJxx00RF Evaluation Module
11