Table of Contents
Advertisement
www.ti.com
7 HSDC Pro Settings for Optional ADC Device Configuration
This appendix provides settings for optional ADC device configuration in HSDC Pro.
7.1 Changing the Number of Frames per Multi-Frame (K)
Changing the number of frames per multi-frame output by the JESD204 transmitter (ADC device) is configured
using the K parameter on the JESD204C tab in the Configuration GUI. This parameter must be matched by the
receiving device, and the SYSREF frequency must also be programmed to a compatible frequency. Ensure that
the K value complies with the K Min and Step values for the selected JMODE. Refer to the ADC12DJ5200RF
operating modes table in the
7.2 Customizing the EVM for Optional Clocking Support
The ADC12DJ5200RFEVM can be clocked using 3 different methods: external clock option, onboard clock
option and external reference clock option.
SLAU640A – APRIL 2019 – REVISED JUNE 2021
Submit Document Feedback
ADC12DJ5200RF data
sheet.
Copyright © 2021 Texas Instruments Incorporated
HSDC Pro Settings for Optional ADC Device Configuration
ADCxxDJxx00RF Evaluation Module
17
Advertisement
Table of Contents
