Figure 1-1. Evm Orientation - Texas Instruments ADC DJ 00RF Series User Manual

INA
( J4 )
LMX2594
+12V DC
ADC12DJ5200RF EVM top side
without heat sink installed
The digital data from the ADCxxDJxx00RFEVM board is quickly and easily captured with the TSW14J57EVM
data capture boards.
The TSW14J57EVM cannot be used for JMODES that use 64b/66b encoding, or serial rates above 15
Gbps.
The TSW14J57EVM captures the high-speed serial data, decodes the data, stores the data in memory, and then
uploads it to a connected PC through a USB interface for analysis. The High-Speed Data Converter Pro (HSDC
Pro) software on the PC communicates with the hardware and processes the data.
With proper hardware selection in the HSDC Pro software, the TSW14J57 device is automatically configured to
support a wide range of operating speeds of the ADCxxDJxx00RFEVM, but the device may not cover the full
operating range of the ADC device. Serial data rates of 15 Gbps down to 1 Gbps are supported.
2 ADCxxDJxx00RF Evaluation Module
INA+/-
INB
( J7 )
ADC12DJ5200RF
External reference
clock input ( J17 )
USB
Connector
ADC12DJ5200RF EVM top side with
heat sink installed

Figure 1-1. EVM Orientation

Note
Copyright © 2021 Texas Instruments Incorporated
Heat Sink for the ADC
INB+/-
External device
Clock input ( J10 )
LM95233
Power (DC/DC
DQG /'2¶V)
ADC12DJ5200RF EVM bottom side
SLAU640A – APRIL 2019 – REVISED JUNE 2021
www.ti.com
FMC+
connector
LMK04828
LMK61E2
Copyright © 2016, Texas Instruments Incorporated
Submit Document Feedback