B Jumpers And Leds; B Revision History; Table 10-1. Jumper Settings; Table 10-2. Leds - Texas Instruments ADC DJ 00RF Series User Manual

Jumpers and LEDs

B Jumpers and LEDs

10.1 Jumper settings
Table 10-1 shows the jumper settings and
Label
J12 ADC power down jumper.
J13 Select the source for Reference clock signal
When hardware calibration trigger option is enabled.
J18 The ADC's calibration routine is can be enable using
J19 Selects the source for SPI signals
Label
D1
D2
D3

B Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision * (April 2019) to Revision A (June 2021)
• Changed the abstract to include additional devices...........................................................................................
• Added a Note to Open the ADC12DJ5200RFEVM GUI and Program the ADC and Clocks .............................8
26 ADCxxDJxx00RF Evaluation Module
Table 10-2

Table 10-1. Jumper Settings

Description
external signal

Table 10-2. LEDs

Copyright © 2021 Texas Instruments Incorporated
shows the LED functionality.
Installed: ADC powered down. Uninstalled: ADC powered up(default)
Installed: External Reference clock signal is selected(default).
Uninstalled: Onboard reference signal (LMK61E2) is selected.
Installed: ADC's calibration routine is triggered. Uninstalled: ADC's
calibration routine is not triggered(default).
Installed: SPI signals from FMC+ connector are controlling the
devices on the EVM. Uninstalled: SPI signal from the onboard FTDI
IC is controlling the devices on the EVMs
Function
High temp indicator
High input power on channel A
High input power on channel B
SLAU640A – APRIL 2019 – REVISED JUNE 2021
www.ti.com
Function
Submit Document Feedback
Page
1