Table of Contents
Advertisement
Setup Procedure
3.9 Open the ADC12DJ5200RFEVM GUI and Program the ADC and Clocks
The Device Configuration GUI is installed separately from the HSDC Pro installation and is a stand-alone GUI.
The max clock rate supported by ADC12DJ4000RF is 4000 MHz and only 8-bit mode are suppored by
ADC08DJ5200RF. All the 12-bit and 15-bit modes are disabled on ADC08DJ5200RF.
8
ADCxxDJxx00RF Evaluation Module
Note
Figure 3-2. Configuration GUI EVM Tab
Copyright © 2021 Texas Instruments Incorporated
SLAU640A – APRIL 2019 – REVISED JUNE 2021
Submit Document Feedback
www.ti.com
Advertisement
Table of Contents
