Sd-Card Reader; Removing The Sd-Card Reader - Dell OptiPlex 7000 Small Form Factor Service Manual

Steps
1. Align and place the bracket on the slot on the chassis.
2. Replace the two (#6-32) screws that secures the bracket to the chassis.
Next steps
1. Install the hard-drive and optical-drive
2. Install the 3.5-inch hard-drive.
3. Install the 2.5-inch hard-drive.
4. Install the front bezel.
5. Install the side cover.
6. Follow the procedure in

SD-card reader

Removing the SD-card reader

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
5. Remove the 3.5-inch
6. Remove the hard-drive and optical-drive
38 Removing and installing components
bracket.
after working inside your
before working inside your
hard-drive.
hard-drive.
cage.
computer.
computer.