e
cover
5
Follow the procedure in
SD card
Removing the SD card reader
1
Follow the procedure in
2
Remove the:
a
cover
b
bezel
c
hard drive and optical drive module
d
M.2 PCIe SSD
3
To remove the SD card reader:
a
Release the power supply unit cables from the retention clips on the SD card reader enclosure [1].
b Remove the screws that secure the SD card reader and lift it away from the computer [2] [3].
Installing the SD card reader
1
Place the SD card reader on the chassis.
2
Tighten the screws that secure the SD card reader to the computer.
3
Install the:
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
25
Need help?
Do you have a question about the OptiPlex 3050 Small Form Factor and is the answer not in the manual?
Questions and answers