Intrusion Switch; Removing The Intrusion Switch - Dell OptiPlex 7000 Small Form Factor Service Manual

Steps
1. Align and insert the front-bezel tabs with the slots on the chassis.
2. Rotate the front bezel towards the chassis and snap it into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

Intrusion switch

Removing the intrusion switch

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the intrusion switch and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 17