Sd-Card Reader; Removing The Sd-Card Reader - Dell OptiPlex 5090 Small Form Factor Service Manual

Steps
1. Insert and slide in the optical drive into the hard-drive and optical drive bracket.
2. Push the optical drive unit until it clicks in place.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

SD-card reader

Removing the SD-card reader

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5/3.5-inch hard-drive
5. Remove the hard-drive and optical-drive
after working inside your
before working inside your
caddy.
bracket.
computer.
computer.
Removing and installing components 33