4. Install the:
a)
Hard drive and optical drive module
b)
Front bezel
c)
Side cover
5. Follow the procedure in
SD card reader - optional
Removing the SD card reader
1. Follow the procedure in
2. Remove the:
a)
Side cover
b)
Front bezel
c)
Hard drive and optical drive module
3. To remove the SD card reader:
a) Unroute the power cables from the retention clip on the SD card reader [1].
b) Remove the two (M3) screws that secures the SD card reader to the I/O panel and the system board [2].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
53