Wlan Antennas (External); Removing The External Wlan Antenna - Dell OptiPlex 7000 Small Form Factor Service Manual

About this task
The following image indicates the location of the WLAN antenna and provides a visual representation of the installation
procedure.
Steps
1. Route the WLAN antenna cables through the routing guides on the chassis.
2. Place and align the screw holes on the WLAN antenna with the screw holes on the chassis
3. Replace the two (M2x3) screws to secure the WLAN antenna to the chassis.
Next steps
1. Install the hard-drive and optical-drive
2. Install the WLAN card.
3. Install the 3.5-inch hard-drive.
4. Install the 2.5-inch hard-drive.
5. Install the front bezel.
6. Install the side cover.
7. Follow the procedure in

WLAN antennas (External)

Removing the external WLAN antenna

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
48 Removing and installing components
cage.
after working inside your
before working inside your
hard-drive.
computer.
computer.