Wlan Antenna; Removing The Internal Wlan Antenna; Installing The Wlan Antenna - Dell OptiPlex 7000 Small Form Factor Service Manual

WLAN antenna

Removing the internal WLAN antenna

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch
5. Remove the 3.5-inch
6. Remove the hard-drive and optical-drive
7. Remove the WLAN card.
About this task
The following images indicate the location of the internal WLAN antenna and provide a visual representation of the removal
procedure.
Steps
1. Remove the antenna cables from the routing guides on the chassis.
2. Remove the two (M2x3) screws that secures the WLAN antenna to the chassis.
3. Lift and remove the WLAN antenna from the chassis.

Installing the WLAN antenna

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
before working inside your
hard-drive.
hard-drive.
cage.
computer.
Removing and installing components 47