Hard Drive; Removing The 2.5-Inch Hard Drive - Dell OptiPlex 7000 Small Form Factor Service Manual

Steps
1. Slide the intrusion switch into the slot on the chassis.
2. Insert the connector from intrusion switch cable into the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Hard drive

Removing the 2.5-inch hard drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
after working inside your
before working inside your
computer.
computer.
Removing and installing components 19