Dell OptiPlex 7000 Small Form Factor Service Manual page 83

Table 6. System setup options—System Configuration menu (continued)
System Configuration
Rear USB Configuration
Audio
Miscellaneous Devices
Table 7. System setup options—Video menu
Video
Multi-Display
Primary Display
Table 8. System setup options—Security menu
Security
Admin Password
System Password
Internal HDD-0 Password
Password Configuration
Password Change
UEFI Capsule Firmware Updates
PTT Security
PTT On
Clear
PPI ByPass for Clear Command
Absolute(R)
Admin Setup Lockout
Master Password Lockout
SMM Security Mitigation
Table 9. System setup options—Secure Boot menu
Secure Boot
Secure Boot Enable
Secure Boot Mode
Deployed Mode
Audit Mode
Expert Key Management
Enable or disable the rear USB ports.
Enable or disable the integrated audio controller.
Enable or disable various onboard devices.
Enable or disable multiple displays.
Set or change the primary display.
Set, change, or delete the administrator password.
Set, change, or delete the system password.
Set, change, or delete the internal hard-disk drive password.
Control the minimum and maximum number of characters allowed for Admin
and System passwords.
Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.
Enable or disable BIOS updates through UEFI capsule update packages.
Enable or disable Platform Trust Technology (PTT) visibility to the operating
system.
Default: Disabled
Enable or disable the TPM Physical Presence Interface (PPI). When enabled,
this setting will allow the OS to skip BIOS PPI user prompts when issuing
the Clear command. Changes to this setting take effect immediately.Default:
Disabled
Enable or disable the BIOS module interface of the optional Computrace(R)
Service from Absolute Software.
Enable to prevent users from entering Setup when an Admin Password is set.
Disables the master password support. Hard Disk passwords need to be
cleared before changing the setting.
Enable or disable SMM Security Mitigation
Enable or disable the secure boot feature.
Modifies the behavior of Secure Boot to allow evaluation or enforcement of
UEFI driver signatures.
● Deployed Mode-Default: Enabled
● Audit Mode-Default: Disabled
Enable or disable the deployed mode.
Enable or disable the audit mode.
BIOS setup 83