Memory Module; Removing Memory Module; Installing The Memory Module; Sd Card Reader - Dell OptiPlex 7050 Small Form Factor Owner's Manual

Memory module

Removing memory module

1 Follow the procedure in
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
3 To remove the memory module:
a Push the memory module retention tabs on both sides of the memory module.
b Lift the memory module from the memory module connector on the system board.

Installing the memory module

1 Align the notch on the memory module with the tab on the memory module connector.
2 Insert the memory module into the memory module socket.
3 Press the memory module until the memory module retention tabs click into place.
4 Install the:
a optical drive
b 2.5–inch drive assembly
c bezel
d cover
5 Follow the procedure in

SD card reader

Removing the SD card reader

1 Follow the procedure in
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
e M.2 PCIe SSD
3 To remove the SD card reader:
24 Removing and installing components
Before working inside your
After working inside your computer.
Before working inside your
computer.
computer.